Error Code 0xC1900208 and Workaround…

Windows 10 Compatibility checks + Intel Display Adapters + KB4022719 = 0xC1900208

If you’re in the middle of upgrade testing, you may be very well versed in the 0xC1900208 error code, which indicates a compatibility check failure for the Windows 10 in-place upgrade process.  When reviewing the compatibility results, you may find that your system reports you’ll have issues with your display adapter in Windows 10.  The block is a hard block and the upgrade will not proceed.

The failure may be due to the June Rollup KB4022719, which takes one step forward and resolves a compatibility issue with AMD display adapters, but also creates a new compatibility failure for Intel Display adapters.

Microsoft has not noted this in the comments and do not seem to be issuing any fixes yet.  The recommendation is to uninstall the display adapters as opposed to uninstalling the security updates.

I was recently at a customer site where this issue presented itself on HP 850 Model G1/G2/G3 devices and a workaround needed to be developed for their in-place upgrades to succeed.  Instead of asking users to uninstall the display adapter and driver manually prior to the upgrade, we decided to take advantage of the devcon.exe file that comes with the Windows Driver Kit.

A Link to DevCon.exe information:

High-Level Steps

Three steps were required to provide this workaround:

  1. Device Installation settings must be configured to never install driver software from Windows Update (as in the figure below).  This prevents the system from connecting online and reinstalling the driver after you uninstall.
  2. The display adapter needs to be removed.
  3. The OEM driver needs to be deleted.

Additional Details

Step 1 can be automated in a task sequence step using the REG command:

reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\DriverSearching /t REG_DWORD /v SearchOrderConfig /d 0x0 /f

For steps 2 and 3, a custom script was developed in PowerShell that utilizes devcon.exe to remove the associated display adapter and delete the OEM driver associated with the specific hardware.  The commands are as follows:

Devcon.exe remove <hardware ID>

Devcon.exe dp_delete <OEMDriver.INF>

To Find the Hardware ID for the models that are failing to pass the compatibility checks, we simply opened device manager and viewed the properties of the display adapter causing the issue.  On the details tab, you can review the Hardware ID property and grab the ID listed first in the list (see figure below).

Once we obtained the hardware ID, we then parsed through all drivers using the following command and scriptomagically grabbed the appropriate INF file name to delete.  The Command to parse is devcon.exe dp_enum.

So a quick sample of the commands would be as follows:
reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\DriverSearching /t REG_DWORD /v SearchOrderConfig /d 0x0 /f

devcon.exe remove "*pci\ven_8086&dev_1616&subsys_2216103c&rev_09*"

devcon.exe dp_delete OEM56.inf

The reg add command replaces whatever value is in the SearchOrderConfig with the appropriate value to tell the system NOT to go to windows update for driver updates.  The second command will remove the device associated with the hardware ID you specified.  The third command will remove the driver associated with the display adapter.  Note that in the above list of commands, OEM56.inf is just an example.  You will need to enumerate all your installed devices to determine which INF file to remove.

So, in summary:

Intel Display Adapters in, at least, certain HP models, no longer pass compatibility checks with Windows 10 v1703.  You must turn off automatic updating of display adapters in Windows, remove the display adapter, remove the driver associated with the display adapter (so that it will not find the local copy), and then run your upgrade.  Doing so will allow your system to pass the compatibility check that is now failing since the June Rollup was deployed.

Hopefully this will save some of you the headaches and troubleshooting steps we ran into.

Happy Upgrading!


2017-07-27T01:15:46+00:00August 2nd, 2017|blog, Windows 10|

About the Author:

Nick Aquino has dropped the mic.